![]() ![]() ![]() Device shall support SFTP and SSH for secure communication between the control processor and the configuration or programming software.Device shall support SFTP and SSH for secure communication between the control processor and TouchLink Pro touchpanel.The device’s configuration and settings shall be managed using Extron’s Toolbelt software.Shall be configured or programmed by an Extron authorized user.The device may only be configured or programmed using Extron’s Global Configurator Plus or Professional, or Global Scripter respectively.User interface shall be created using Extron’s GUI Designer software.Device shall be weighted and have an optimized viewing angle of 65°.Device shall have the ability to sit on a tabletop that can be secured using the threaded holes in the base of the touchpanel while using owner furnished screws.Device shall have the ability to be controlled by an HTML5 and JavaScript or Silverlight enabled web browser, or an iOS or Android based device as a secondary point of control.Device shall have the following memory available, at minimum:.Device shall support the following protocols: DHCP, DNS, HTTP, HTTPS, ICMP, SFTP, SSH, TCP/IP, UDP/IP.Device shall include a multi-function button located on the bottom of the enclosure hidden behind a removable door that allows for the reset of the device or its communication properties at minimum.Device shall have a menu button located on the bottom of the enclosure hidden behind a removable door for setup of items such as IP address and sound volume at minimum. ![]() Provide a front panel status LED that blinks red if the touchpanel loses network connectivity with the control processor.Provide a light sensor located on the top bezel of the touch surface that automatically adjusts the LCD screen’s backlight based on available ambient light.Provide a built-in motion sensor located on the top bezel of the touch surface allowing the panel to be woken from a sleep state or set up via software to trigger any number of actions.Provide a total of two integrated red/green LED status lights - one located on the front-bottom center of the enclosure and the second located on the back-top center of the enclosure, both of which can be configured or programmed.Device shall include a single high-speed USB 2.0 type A connection located on the back of the enclosure hidden behind a removable cover plate.Device shall have a female RJ-45 jack located on the bottom of the enclosure hidden behind a removable door that supports 10/100/1000Base-T, half/full duplex with auto-detect for connection to a LAN or WAN and includes link and activity LED indicators located on the left and right of the jack for troubleshooting network issues as well as supports PoE- Power over Ethernet, 802.3af.Device shall include a built-in down firing speaker which can be configured to provide audio and button feedback.Device shall support Extron IP Link Pro control processors.Device shall feature scratch and smudge-resistant Corning® Gorilla Glass®.Provide a 10" LCD touchscreen that supports up to 16.7M colors and 1280x800 resolution.Tabletop 10" touchscreen user interface for AV and control systems.Provide a 10" capacitive touchscreen interface for switching and control of AV equipment.
0 Comments
Leave a Reply. |